(excl. BMX)
Relay All Terrain Hub
As low as 6 payments of
$4.16
with
|
|
|
|
|
|
DESCRIPTION
You’ve got the beast, now make it your own! Pimp your All Terrain setup with our hubs in a colour that reflects you
Manufactured by Evolve, these hubs have been designed for use on our all terrain electric skateboards.
Contents
- 1 x All terrain hub
- Hub nuts
- Hub bolts
- Built-in wheel balance weights
Compatibility
This pattern was released with the GTR1 ad GT series boards
- Please note, that you will need the compatible Relay drive gears for installation
Installation
We recommend you keep your tyre pressure at 40-45psi. If you notice any decrease in your range, be sure your tyres are pumped up!
If you have any questions, please don't hesitate to email our customer service team at ask@evolveskateboards.com.au.
DOMESTIC SHIPPING
All our boards are sent through Startrack or TNT Road Freight. Our boards must be handled as dangerous goods due to Australian lithium battery regulations which may require a mandatory overnight holding period, which can affect shipping times. These packages are not tracked as well as standard post so please use the below transit times as a rough guide.
We are unable to ship skateboards and batteries to Parcel Lockers, P.O. Boxes, Military Bases or temporary accommodation. Please provide us with a home/work address and ensure your billing/shipping address is correct.
TRANSIT TIMES:
- South East Queensland, 3 – 5 Days
- Queensland, 5 – 7 Days
- Rural Queensland, 7 – 12 Days
- North Coast of NSW, 3 – 4 Days
- NSW, 4 – 6 Days
- Rural NSW, 7 – 12 Days
- Victoria, 4 – 7 Days
- Rural Victoria, 7 – 12 Days
- ACT, 5 – 7 Days
- South Australia, 5 – 7 Days
- Rural South Australia, 7 – 12 Days
- Western Australia, 7 – 12 Days
- Rural Western Australia, 9 – 12 Days
- Tasmania, 7 - 12 Days
- Northern Territory, 9 - 12 Days
* Please note that all transit times are calculated in Business Days
INTERNATIONAL
Please check here to see if you have a local distributor in your country.
If you do not have a local distributor in your area and it's not listed above please contact ask@evolveskateboards.com.au for assistance.
Yes they look great, installed easily as usual, however the bearing holder is approx 0.3mm larger than the bearing diameter (new Evolve bearing and old original bearings tested). Doesnt sound a lot, but that equates to about 8mm sideways travel at the tread. This was way more than the 3mm gap between the tyre and the belt cover. Current solution is a layer of masking tape around the bearing, slightly overlapped on the inside edge to hold the tape from working out.
New wheels look really good and they were on special so thought why not. However I notice the bearing are not firm in the wheel and the wheel rattles slightly. Original 7 year old wheels were the same so that one reason I bought new ones. I also bought new Speed Balls bearings to fit and they are the ones they are loose. Not a huge issue but throught they would be a tighter fit.
Hey Dave, thanks for the review and feedback!
As we can see you've got a GT board, the loose bearings you mentioned may be due to you needing speedrings to rid the issue.
Please send us an email at support@rideevolve.com.au with your best detailed description of the issue and if possible a video too showing where the bearings are loose and we'll hopefully be able to help you sort this out!
Best regards
Evolve HQ
Lookin so,so good. Loving it.
Hi, purchased these with an earlier board but want to use them on my later version board GTR Carbon. Can you still get the gear needed and will it fit the GTR ?
Hi Ronan, Yes you can still buy the Relay 66T Drive Gears required to fit those hubs.